我在东芝的英文网站上看到了这款机器的介绍,有驱动程序下载,也有说明书:这是它的网址(110CS)
http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp?BV_SessionID=@@@@0121774740.1003452481@@@@&BV_EngineID=iadccfdfkihmbfekcghcfmfdgli.0下面的一段文字是我从网站下载的说明书中有关内存扩展的一段COPY下来的:但是我不知道具体是什么的,我打开后盖也没看到内存条呀?是不是集成在主板上了?没敢动,就又盖上了,具体的内容您可以在上面的网址中下载一个说明书,英文的,我看不懂。谢谢了
Adding Memory (Optional)
Your computer comes with enough memory to run most of today's popular applications. However, you may want to increase the computer's memory. With additional memory, the computer:
v can run more programs and open more documents at the same time.
v runs Windows 95 and Windows applications faster.
By installing extra memory now, you'll be able to operate your computer at its maximum capacity from the start. Of course, you can always come back to this section if you decide to add memory at a later time.
Sizes of Memory Modules
Additional memory is easy to install. Memory modules, available from your dealer, come in the following sizes:
Memory Module Size Total Memory in System
8MB 16MB
16MB 24MB
32MB 40MB
Install the Memory Module
The memory module installs into the memory expansion slot on the bottom of the computer. You'll need a small Phillips screwdriver for this procedure:
1 Click Start, then click Shut Down.
If the computer is already turned off, skip to step 3.
2 Click the button next to Shut down the computer, then click Yes.
Windows 95 shuts down and turns the computer off automatically.
3 Unplug the computer.
WARNING
Installing a memory card with the computer's power on may damage the computer, the card or both.
4 Close the display and remove any cables you may have connected.
If you're following the steps in this chapter, you haven't connected any yet.
5 Turn the computer upside down.
The memory slot cover
6 Use a small Phillips screwdriver to remove the two screws that secure the memory slot cover.
7 Remove the memory slot cover.
Removing the screws
8 Remove the two screws from the memory slot.
CAUTION
Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to touch its pin connector (on the side you insert into the computer).
Inserting the memory module
9 Carefully place the module in the slot. Line up the connector on the module with the connector in the computer.
10 Gently press the module down into place.
11 Secure the module in place with the two screws you removed in step 6.
12 Replace the memory slot cover.
13 Replace the screws you removed in step 4 and tighten them.
14 Turn the computer over.
When you turn your computer on, it recognizes the additional memory automatically.
Removing a Memory Module
If you ever need to remove the memory module:
1 Follow steps 1 through 8 in the previous section to open the memory slot and remove the screws that secure the card.
Removing the memory module
2 Lift up the memory card tab to remove the card.
3 Replace the screws that held the card in place.
4 Follow steps 10 through 12 in the previous section to close and secure the memory slot.